Click Here Software Co

ZoneMinder130 Home --> release notes

This is a minor release, yet major in some ways

Added code for the installation that checks for the presence of systemd and whether it is running or not. This will allow ZoneMinder130 to install on Debian or Ubuntu based systems that do not have systemd running. As of this release, testing has been done using Puppy Linux with Debian 12 bookworm and Ubuntu 24.04 noble. So, as of this release, installation can be done with or without systemd running.

Removed the volume control in the live event view when Mocord or Modect isn't being used.

This is the initial public release of ZoneMinder130. The notes listed here consist of the changes and updates to the original ZoneMinder V1.30.4 which was released in 2017.

Updated much of the code to work with newer Linux OS's as well as the latest versions of ffmpeg, php, and mariadb.

This first release includes support for Debian 11 (bullseye), Debian 12 (bookworm), Debian 13 (trixie), Ubuntu 22.04 (jammy), and Ubuntu 24.04 (noble).

Installing the deb package takes care of the complete installation. No need for complicated and confusing configuring after the installation to get up and running. ZoneMinder130 should be ready to run after the installation finishes. The user merely needs to set up the cameras and the zones for each camera.

While viewing an event, if you change the scale of the video, the window will also resize to match the video size.

Alarm sound works in both live view and montage view. A default alarm sound is included so that the audible alarm works right out of the box.

Montage view uses a slightly bolder outline when an alarm occurs. It makes it easier to spot the camera that is alarming.

Increased the font size slightly in the classic, dark, and flat themes.

Adjusted the colors in the dark theme to make it easier to view.

Added an enhanced version of the flat theme called flat-bold. It uses a slightly larger font and different colors to make it easier to read and easier on the eyes.

There is also a dark version of the flat-bold theme called flat-bold-dark.

Documentation is built in. There is a link on the console to view the docs. The docs need updating. They are currently the same docs used in 2017 for V1.30.4. Much of it still pertains, though. The docs will be updated soon.

Added a default volume control setting for the alarm sound. It is located in Options under the Web tab. This sets the default volume for the alarm sound in a live view and montage view when an alarm occurs.

Added a volume control for the alarm sound in the live view and montage view. The default setting is set in Options. However, you can temporarily change the volume while viewing a live stream as there will be times when you will need to raise or lower the volume. When you click on the volume selection, it will play the alarm sound at the current volume setting. If you select a different volume level, the alarm sound will play again.

Changed many of the default settings in Options to be more up to date with today's better hardware.

"High" bandwidth is now the default.

The installation automatically detects the timezone that is configured on your system and will tell PHP to use it. The setting can be found in Options under the System tab if you ever need to change it. There is no need to set it in the php.ini file.

Added two new layouts to the montage view, 3-wide scaled and 4-wide scaled. These are similar to the existing 3-wide scaled layout except the alarmed window doesn't go full screen. Always use Actual for the Scale or it won't work right.

Reduced the height of the header in the montage view to make more room for the camera views.

In the Live view, if not using Mocord or Modect, the Disable Alarms and Force Alarm links disappear. They are only appropriate to have visible if Mocord or Modect is used.

In the events listings the pagination numbers were too small which made it hard to point your mouse at the page you wanted to move to. They now use a larger font size.

Removed the telemetry feature. I don't believe in gathering information and using it for any reason. So, that feature is gone from the code and removed from Options.

Removed the dialog box that pops up periodically asking for a donation. Donations are always welcome, but I m not going to bug you for them.

Bug and issue fixes since ZoneMinder V1.30.4:

Fixed a bug when using Mocord. If an alarm occurred near the end of a section, after the alarm ended and a new event started, the new event would only contain one frame and then another new event would start. This one frame event would cause the DVR controls to freeze when viewing the events.

Fixed a bug when viewing events that would occasionally lock up the DVR controls when moving to the next or previous event.

When using Mocord and viewing a live stream, if you clicked on Disable alarms, the recording would stop. Recording would start again after clicking Enable alarms. Recording keeps going now when disabling the alarms. This allows you to use the pan, tilt, and zoom controls to move the camera around without triggering an alarm while still maintaining the recording.

When viewing a live stream or the montage view, it is possible that the alarm sound might not play when an alarm occurs. Some browsers feel as though it is annoying for a sound to play unless the user approves it. If this happens, any sort of interaction with the window will cause the browser to remove this block. You can click on any part of the window, even a blank area. The best thing to do is to click on the volume selection. This will not only remove the browser's block, but it will also play the alarm one time so you can hear how loud it is as well as knowing that it is working correctly.

Fixed a bug when viewing a live stream and if Controls were enabled, the name of the Control type would appear in the upper left corner of the window instead of the monitor name. The monitor name now shows all the time whether Controls are enabled or not.

Fixed a bug when viewing an event that is shorter than a full section length and also contains one or more alarms. When clicking on the progress bar to seek to a different spot in the video, it would either lock up the controls or it might seek to a different spot than what was intended. This is fixed now so that seeking always works as intended whether the event contains alarms or not and whether it is a full section length or not.

Many little fixes and improvements too numerous and too minor to mention.